排序方式: 共有52条查询结果,搜索用时 15 毫秒
1.
《中国航空学报》2021,34(10):81-90
In this paper, the flow field characteristics of Oblique Detonation Waves (ODWs) induced by a finite wedge under argon dilution are studied by solving the Euler equations with a detailed chemical model of hydrogen and air. First, the effects of the expansion waves, argon concentration, geometric parameters, and Mach number on the ODW are discussed. The results show that the changes of these parameters may make the oblique detonation not be initiated. Then, the ODW initiation criterion of the finite wedge is summarized, as the characteristic length of the induction zone LC and the characteristic length of the oblique wedge LW meet the condition LC/LW < 1, the initiation of the ODW occurs; otherwise, it does not occur. What’s more, the Constant Volume Combustion (CVC) theory is applied to study the characteristic length of induction zone. It is found that CVC theory is more suitable for the “smooth transition” type of ODW flow field, the theoretical and numerical characteristic length in induction regions are in good agreement. This work is of great significance for the design of oblique detonation engines for hypersonic vehicles. 相似文献
2.
3.
4.
5.
为了增强多目标粒子群优化算法的收敛性与多样性,提出一种改进的多目标粒子群算法.采用Kent映射对种群进行初始化,并将目标空间均匀划分为若干扇形区域;基于一种新的多样性和收敛性判定标准,选取合适的收敛性最优解和多样性最优解,并提出一种改进的粒子群更新公式进行全局搜索;采用聚类算法对外部种群与坐标轴夹角进行分析,维护外部种群.通过标准测试函数的仿真实验,与多目标优化算法基本MOPSO(Multi-objective Particle Swarm Optimization Algorithm)和NSGA-II(Nondominated Sorting Genetic Algorithm II)进行对比,结果表明了该改进算法的有效性. 相似文献
6.
根据SP-ATR目前存在的燃气难以兼顾清洁和富燃的问题,文章提出将原本由1股燃气单独承担驱动涡轮和补燃功能的工作模式分解为由2股燃气分别担负驱涡和补燃功能的工作模式。通过对比分析该工作模式的SP-ATR和固冲发动机、涡喷发动机工作特点,提出了适合该形式SP-ATR的性能计算模型,得到其飞行包线,发现该SP-ATR工作包线宽广,可完全包含涡喷和固冲发动机的工作包线。在此基础上,计算得到了SP-ATR在不同空域和速度条件下的飞行性能及变化规律:(1)随飞行高度和速度的增加,其比冲、比推力增加,但性能随外弹道变化幅度较小,整个工作范围性能稳定;(2)在近地面和低空SP-ATR均可实现低空亚音速盘旋和5 km高度以上的超音速飞行,且在比冲高于6 700 N.s/kg,同时保持比推力大于1 100 N.s/kg;(3)高空SP-ATR工作高度速度范围宽,比冲性能与冲压发动机相当,比推力为冲压发动机的2倍,相同飞行速度条件下飞行高度增加比冲增加、比推力增加,具有在更高高度巡航潜力,高空性能优势明显。 相似文献
7.
8.
9.
提出考虑喷丸残余应力及内部夹杂影响的随机内部小裂纹形核扩展概率模型,实现构件内部疲劳裂纹萌生过程的仿真。针对高温合金X,在开展试验的数据基础上,识别模型所需的残余应力分布参数、“形核相关”夹杂尺寸分布参数、微观结构相关塑性本构参数及小裂纹形核扩展参数。模型成功预测喷丸等直棒两种主要的形核方式:残余拉应力平衡层夹杂形核及无残余应力区夹杂形核。与试验对比,模型预测内部裂纹萌生寿命及其分散精度高,残余拉应力平衡层预测萌生寿命中值误差为2%,-3σ寿命误差为37%,无残余应力区预测萌生寿命中值误差为3%,-3σ寿命误差为3%;此外,模型仿真的内部裂纹形貌为“鱼眼形”,贴合试验件断口形貌。 相似文献
10.